...
Width Adjustment on V-Grooves
...
If the V-Groove is cutting Too Thin, Increase the Width Adjustment.
If the V-Groove is cutting Too Wide, Decrease the Width Adjustment.
...
Cutting Direction of V-Grooves
...
| Tip |
|---|
|
...
V-Groove Width is too Thin
...
If the V-Groove is cutting Too Thin, Increase the Width Adjustment.
| Expand | ||
|---|---|---|
| ||
The Width Adjustment controls the Width of the V-Groove Lines. If the V-Groove is cutting Too Thin, Increase the Width Adjustment.   |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...
V-Groove Width is too Wide
...
If the V-Groove is cutting Too Wide, Decrease the Width Adjustment.
| Expand | ||
|---|---|---|
| ||
The Width Adjustment controls the Width of the V-Groove Lines. If the V-Groove is cutting Too Wide, Decrease the Width Adjustment. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...
Opening Adjustment: V-Groove
...
If the V-Groove is cut Too Large, Decrease the Opening Adjustment.
If the V-Groove is cut Too Small, Increase the Opening Adjustment.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the V-Groove is cut Too Large, Decrease the Opening Adjustment. If the V-Groove is cut Too Small, Increase the Opening Adjustment. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...
Width of an Open V-Groove
...
If the Open V-Groove width is Too Large Decrease the VG-Width.
If the Open V-Groove width is Too Small Increase the VG-Width.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
The Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening. *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration. See: 45 Degree Normal Bevel Drop Configurations See: 45 Degree Normal Bevel Opening Configurations See: 45 Degree Plus Normal Bevel Drop Configurations See: 45 Degree Plus Normal Bevel Opening Configurations See: 45 Degree Front Normal Bevel Drop Configurations See: 45 Degree Front Normal Bevel Opening Configurations |
| Expand | ||
|---|---|---|
| ||
The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard color is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening. *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration. See: 45 Degree Reverse Bevel Drop Configurations See: 45 Degree Reverse Bevel Opening Configurations See: 45 Degree Plus Reverse Bevel Drop Configurations See: 45 Degree Plus Reverse Bevel Opening Configurations See: 45 Degree Front Reverse Bevel Drop Configurations See: 45 Degree Front Reverse Bevel Opening Configurations |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Too Wide | Too Thin | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|