Page Comparison

• For Additional Information: See Using the Backup and Overcut Display on the Cut Preview for Troubleshooting.

• The Backup controls where the Crease cartridge Plunges into the Matboard. 

  • If the Backup is Too Long, Decrease the Backup.

  • If the Backup is Too Short, Increasethe Backup.

• The Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

See: Backup on Creases in Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.