Overcut on Creases
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
Select desired Cartridge Tab. Select the desired Bevel Type from Current Bevel Type. Edit the desired Configuration field. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Crease Overcut Too Long
If the Overcut is Too Long, Decrease the Overcut.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| title | Overcut of Creases Definition |
|---|
If the Overcut is cut Too Long, Decrease the Overcut.
If the Overcut is cut Too Short, Increase the Overcut.
See: Overcut for Creases Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Crease Overcut Too Short
If the Overcut is Too Short, Increase the Overcut.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| title | Exterior Overcut of Creases Definition |
|---|
If the Overcut is cut Too Long, Decrease the Overcut.
If the Overcut is cut Too Short, Increase the Overcut.
See: Overcut for Creases Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Contents:
| |