Versions Compared

Old Version 10

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Drop Definition

Panel
panelIconIdatlassian-plus1f9d9-200d-2640-fe0f
panelIcon:pluswoman_mage:
panelIconText:plus:🧙‍♀️
bgColor#FFFAE6

  • The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front.

  • The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

Expand
titleDrop General Full Definition

  • The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front.

    • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type

dropdown control

    • Dropdown Control to edit this configuration.

  • The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    • Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type

dropdown control

    • Dropdown Control to edit this configuration.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Dropis one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.Image RemovedImage RemovedImage RemovedImage Removed

See: 45 Degree Drop Configurations

See: 45 Degree Plus Drop Configurations

See: 45 Degree Front Drop Configurations

See: 52 Degree Drop Configurations

See: 90 Degree Drop Configurations

Expand
titleNormal Bevel Drop Full Definition
BevelOutside70800.pngImage AddedNoBevelOutside70800.pngImage Added
Excerpt
hiddentrue
nameDrop

  • The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front.

    • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type

...

    • Dropdown Control to edit this configuration

...

    • .

  • The

...

See: 45 Degree Drop Configurations

See: 45 Degree Plus Drop Configurations

See: 45 Degree Front Drop Configurations

See: 52 Degree Drop Configurations

See: 90 Degree Drop Configurations

...

titleReverse Bevel Drop Full Definition

...

  • Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    • Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type

...

    • Dropdown Control to edit this configuration.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

...

See: 45 Degree Reverse Drop Configurations

See: 45 Degree Plus Reverse Drop Configurations

See: 45 Degree Front Reverse Drop Configurations

See: 52 Degree Reverse Drop Configurations

See: 90 Degree Reverse Drop Configurations

BevelOutside70800.pngImage AddedNoBevelOutside70800.pngImage Added