Page Comparison

• The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

  • If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

  • If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for Openings Configurations

See: Vertical Home for V-Grooves Configurations

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for Openings Configurations

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.