Page Comparison

• The Headis attached to the Gantry via the Head Grabber Arm which moves vertically on the Gantry via the Gantry Vertical Belt.

Connections:

• The Head Grabber Arm contains the Air Connections between the Headand the Gantry as well as the Head Power Plug.

• Air Lines are attached matching colors.

  • Red Air Line Controls controls Blade Plunge.

  • Blue Air Line Controls controls Head Lift.

• On newer models, the Head Assembly Power Cable Strain Relief spanner fits around the Head Power Plug.

• On the Z1, the M12 Cable is attached between the Head Grabber Arm and the top of the Head.

Troubleshooting:

• If the matboard is being pushed aside when you try to cut and the Head isn’t actually cutting/plunging, check to make sure that your Air Compressor is on.