Page Comparison

The 45° Cartridge cuts the matboard surface with the blade angled at 45°.

This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Normal Bevel Opening Definition

See: 45 Degree Reverse Bevel Opening Definition

See: 45 Degree Normal Bevel Drop Definition

See: 45 Degree Reverse Bevel Drop Definition

See: 45 Degree Outside Definition

See: 45 Degree Normal Bevel Closed V-Groove Definition

See: 45 Degree Normal Bevel Open V-Groove Definition

See: 45 Degree Reverse Bevel Open V-Groove Definition

The 45° Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface.

The matboard core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Normal Bevel Opening Configurations

The 45° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface.

The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Reverse Bevel Opening Configurations

The 45° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface.

The matboard core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Normal Drop or Normal Drop-Front of Matfrom the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Normal Bevel Drop Configurations

The 45° Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface.

The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Reverse Bevel Drop Configurations

The 45° Outside is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface.

The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Outside Configurations

A 45° Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is sliced cut halfway through the its thickness and , revealing the core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree V-Groove Configurations

The 45° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.

Both the matboard core and the lower layer matboard are visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

*The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

See: 45 Degree Normal Bevel Drop Configurations

See: 45 Degree Normal Bevel Opening Configurations

The 45° Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

See: 45 Degree Reverse Bevel Drop Configurations

See: 45 Degree Reverse Bevel Opening Configurations