Page Comparison

• A Swoop in the inside or outside cut of the V-Groove is where the corners Curve Inward toward the opening.

  • If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

A Swoop in a V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Rotation on V-Grooves controls for Swoopsor Flares on V-Grooves.

Image RemovedImage RemovedImage AddedImage Added

See: Rotation on V-Grooves Configurations

A Swoop in the outside cut of the V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Outside Rotation for V-Grooves controls for Swoopsor Flareson V-Grooves.

Image RemovedImage Added

See: Outside Rotation for V-Grooves Configurations

A Swoop on the inside cut of the V-Groove is where the corners Curve Inward toward the opening on the inside cut of the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation for V-Grooves controls for Swoopsor Flareson V-Grooves.

Image RemovedImage Added

See: Inside Rotation for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.