changes.mady.by.user dani.simmonds
Saved on May 14, 2024
Saved on May 29, 2024
The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.
If the Opening is cut Too Large, Decrease the Opening Adjustment.
If the Opening is cut Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Openings Configurations
If the Drop is cut Too Large, Decrease the Opening Adjustment.
If the Drop is cut Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Drops Configurations
If the Outside is cut Too Large, Decrease the Opening Adjustment.
If the Outside is cut Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Outsides Configurations
If the V-Groove is cut Too Large, Decrease the Opening Adjustment.
If the V-Groove is cut Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for V-Grooves Configurations
If the Deboss is Too Large, Decrease the Opening Adjustment.
If the Deboss is Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Deboss Configurations
If the Pen is Too Large, Decrease the Opening Adjustment.
If the Pen is Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Pens Configurations
If the Vinyl is cut Too Large, Decrease the Opening Adjustment.
If the Vinyl is cut Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Vinyl Configurations
If the Crease is Too Large, Decrease the Opening Adjustment.
If the Crease is Too Small, Increase the Opening Adjustment.
See: Opening Adjustment for Creases Configurations
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
