changes.mady.by.user dani.simmonds
Saved on May 07, 2024
Saved on May 20, 2024
...
Click the Cartridge Icon and select the desired cartridge for the current layer.
A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.
When applicable, select the desired Cartridge Type from the Type dropdown control.
Selections available are dependent upon the Cartridge selected.
When a CutArtis placed, it is a single object.
The individual elements cannot be moved separately until the CutArt is Exploded or it is brought into Trace to further edit.
The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit.
Explode the CutArt to move the separate elements of the CutArt individually.
See: CutArt Properties
See: Trace
The Trace utility is a Vector-Baseddrawing graphic program for editing/creating Vectors to either Cut or apply with a Non-Blade Tool on the CMC.
See: Vector Definition
See: Trace Manual
Select the desired CutArt.
Click Explode CutArt on the Advanced tab to break it up into the individual letters.
For Additional information: Right-Click on the CutArt in the Design editor and select Explode CutArt.
The CutArt will be broken up into Individual Segments which can be edited separately.
As an example, these segments were moved separately.
For Additional Information: Right-Click on the object and select Convert to CutArt to bring the design into Trace to further edit.