Page Comparison

Opening Cuts too Far Right (Not Cutting the Outside)

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Panel

For Additional Information: Adjust the
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting ScreenUtility to adjust the bladed cartridges.
See Horizontal Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

Expand

title	Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Expand

title	How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

Panel

For Additional Information: Adjust the
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting ScreenUtility to adjust the bladed cartridges.
See Horizontal Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

Expand

title	Horizontal Home on Openings Definition

The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Expand

title	How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...