Page Comparison

• For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

• For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation on V-Grooves controls for Swoopsor Flares on V-Grooves.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

• For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

The Rotation on V-Grooves controls for Swoopsor Flareson V-Grooves.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.