Page Comparison

...

Box Dimensions

Info
When the desired box template is selected, the fields pertinent for the selected template will be displayed.

Enter in the desired Sizes, such as Length, Width, Depth and Thickness of the box.
- The example box displayed here only has Width because it controls both the Width and Height because it is a square corner protector.

Box Depth
Enter the Depth of the box to be made in the Depth field.

Enter the thickness for the material the box is being cut from in the Thickness field.

Info
This field controls which Creasing Tool is used to create the creases when cutting the box: it uses either the Creasing Tool or the Deboss Tool. The software will also calculate where the fold lines should be based on the thickness and the box template selected.

Enter the thickness for the material the box is being cut from in the Thickness field.

Tip
Default Settings: See Admin > Editor for the default setting Thickness and Tool Threshold settings for the Box/Crease Cartridge.

It will Enter the thickness of 3/32” and below for the material the box is being cut from in the Thickness field to use the Deboss cartridge to create fold lines when cutting thicknesses of 3/32” and below. See: Deboss.

Panel

Tip
Default Settings: See Admin > Editor for the default setting Thickness and Tool Threshold settings for the Box/Crease Cartridge.

Expand

title	Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

It will Enter the thickness of 1/8” and above for the material the box is being cut from in the Thickness field to use the Crease cartridge to create fold lines when cutting thicknesses of 1/8” and above.See: Crease.

Panel

Tip
Default Settings: See Admin > Editor for the default setting Thickness and Tool Threshold settings for the Box/Crease Cartridge.

Expand

title	Crease Definition

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function
See: Crease Cartridge Configurations