Versions Compared

Old Version 11

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 12

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Box Depth

  • Enter the Depth of the box to be made in the Depth field.

Box Thickness

Enter the thickness for the material the box is being cut from in the Thickness field.

Info

  • This field controls which Creasing Tool is used to create the creases when cutting the box: it uses either the Creasing Tool or the Deboss Tool.

  • The software will also calculate where the fold lines should be based on the thickness and the box template selected. 

Tip

  • Default Settings: See Admin > Editor for the default setting for the Box/Crease Cartridge.

Image Added

Thickness: Deboss

  • It will use the Deboss cartridge to create fold lines when cutting thicknesses of 3/32” and below.

  • See: Deboss.

Tip

  • Default Settings: See Admin > Editor for the default setting for the Box/Crease Cartridge.

Expand
titleDeboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image AddedImage Added

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Image Added

Thickness: Crease

  • It will use the Crease cartridge to create fold lines when cutting thicknesses of 1/8” and above.

  • See: Crease. 

Tip

  • Default Settings: See Admin > Editor for the default setting for the Box/Crease Cartridge.

Expand
titleCrease Definition

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

Image AddedImage Added

See: Add Crease Opening Function

See: Crease Cartridge Configurations

Image Added