Versions Compared

Old Version 6

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 7

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

View file
nameEclipseProLegacyAdjustingBladeDepth2024-03-01.pdf

Adjusting Blade Depth

Info

  • As you use different types of matboard, it may be necessary to change the Blade Depth. Follow these steps.

1. Loosen the brass thumb-nut above the cutting Head. Flip the locking handle counter-clockwise.

Image Modified

2. Carefully tip the cutting Head down.

Image Modified

3. With the Blade Depth Adjuster set to the center position (for 4-ply), turn the Depth Adjustment Screw counter-clockwise to increase the Blade Depth, or turn it clockwise to decrease the Blade Depth.

4. Replace the cutting Head into position, flip the locking handle clockwise and tighten the thumb-nut. Make sure the Head is tight in place before cutting. Do a test cut and re-adjust as necessary.

Image Modified