Page Comparison

• Use the Plunge Count toggle to automatically pause for a Blade Change after the specified Number of Blade Plunges entered on the Configurations screen.

• For Additional Information: See Set Number of Blade Plunges in the Configurations screen.

• NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

See: Plunge Count Function

See: Plunge Count Value Configurations