Content Comparison

Cut the Outside as a Shared Edge

Select Shared Edge from the Outside Cut Options dropdown control to cut the shared edges of the outside cuts on the CMC Z1, Z (9000z), 9000 and 8000+.

panelIconId

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
Select Options Menu > Cut Outside to cut the outside of the mat.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.

Panel

1f9d9-200d-2642-fe0f

panelIcon

:man_mage:

panelIconText

🧙‍♂️

bgColor

#FFFAE6

For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+.

tiptip

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside.
Default Settings: See Admin > Cutting for the default settings for the Advanced Options.
Tip
Default Settings: See Admin > Cutting for the default settings for Tilingthe Cut Mode.
Default Settings: See Admin > Cutting for the default settings for the Cut Mode Tiling.
Tip
Default Settings: See Admin > Cutting for the default settings for 90 Degree Outside.

Expand

title	Shared Edge Definition

The Shared Edge function will cut the Shared Edges of the Tiled Outside Cuts on the CMC Z1, Z(9000z), 9000 and 8000+ as one stroke between the designs, instead of cutting the outside of each mat individually.

See: Shared Edge Cut Mode Function

When Tiling, make sure that the Spacing under the Setup Tab is set to Zero (0) so that each design shares the Outside lines with the next design, so it will only cut the single line between them.
If you have Remnant Trimming on, it will also cut off the scrap edge.

tip

Default Settings: See Admin > Cutting for the default settings for Remnant Trimming.

Tip
Default Settings: See Admin > Cutting for the default settings for Tiling.

Tip
Default Settings: See Admin > Cutting for the default settings for 90 Degree Outside.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Advanced Outside Options

Info
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.

Click the Set Advanced Options button on the Cut Preview screen.

Tip
Default Settings: See Admin > Cutting for the default settings for the Advanced Options.
Tip
Default Settings: See Admin > Cutting for the default settings for the Cut Mode.
Tip
Default Settings: See Admin > Cutting for the default settings for Tiling. See Admin > Cutting for the default size for the Spacing between designs. See Admin > Cutting for the default settings for Remnant Trimming 90 Degree Outside.

Click the Set Advanced Options button on the Cut Preview screen.

On the Advanced Outside Options screen, set the Cut Mode to Shared Edge.
The Cut Mode matches the selections from the Outside Cut Options as described above.

The Shared Outside edges of the Tiled design will cut in one stroke.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Tip
Default Settings: See Admin > Cutting for the default settings for Remnant Trimming.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Version	Old Version 20	New Version 21
Changes made by	dani.simmonds	dani.simmonds
Saved on	Apr 15, 2024	Apr 16, 2024

Versions Compared

Key

Cut the Outside as a Shared Edge

Advanced Outside Options