Outside Cut Shared Edge

Cut the Outside as a Shared Edge

Cut the Outside as a Shared Edge

Select Shared Edge from the Outside Cut Options dropdown control to cut the shared edges of the outside cuts.

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See Cut the Outside on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.

Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.

The Shared Edge function will cut the Shared Edges of the Tiled Outside Cuts on the CMC Z1, Z(9000z), 9000 and 8000+ as one stroke between the designs, instead of cutting the outside of each mat individually.

Outside Cut Mode Shared Edge will Share the Outside Edges of a Tiled Design, and Just the Top and Right of a Single Design

See: Shared Edge Cut Mode Function

Outside Cut Mode Shared Edge will Share the Outside Edges of a Tiled Design, and Just the Top and Right of a Single Design

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

FrameShop 7x

Check out our new How To section at: How To...

Outside Cut Shared Edge

Cut the Outside as a Shared Edge

Cut the Outside as a Shared Edge