Page Comparison

Cut Pattern: Unidirectional

Info
Set Unidirectional from the Cut Pattern dropdown control to cut Tiled mats in One Direction only on the CMC Z1, Z(9000z), 9000 and 8000+. Click the Set Advanced Options button to access the Advanced Outside Options.

Click the Set Advanced Options button to access the Advanced Outside Options.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+.

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside.

Tip
Default Settings: See Admin > Cutting for the default settings for the Advanced Options.

Tip
Default Settings: See Admin > Cutting for the default settings for Tiling.

Tip
Default Settings: See Admin > Cutting for the default settings for the Cut Mode.

Tip
Default Settings: See Admin > Cutting for the default settings for 90 Degree Outside.

Select Unidirectional from the Cut Pattern dropdown control.
Click OK.

Info
This will cut the Outside of Tiled mats in One Direction only. This is useful if you want the Outside cuts of the Tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting Bi-Directional (two different directions) when cutting the Outside.

Tip
Default Settings: See Admin > Cutting for the default settings for Tiling.

It will cut the Outsides of Tiled mats in a Unilateral fashion, moving the Head in only One Direction.

Stairstep vs. Optimized vs. Unidirectional

Info
See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.

Defaults: Set the Default for Cutting the Outside

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Defaults: Set the Default for 90 Degree Outside Cut

Expand

title	Default Setting for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Advanced Options

Expand

title	Default Setting for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Cut Pattern

Expand

title	Default Setting for the Default Cut Pattern

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed

Versions Compared

Old Version 17

New Version 18

Key

Cut Pattern: Unidirectional

Stairstep vs. Optimized vs. Unidirectional

Defaults: Set the Default for Cutting the Outside

Defaults: Set the Default for 90 Degree Outside Cut

Defaults: Set the Default for the Advanced Options

Defaults: Set the Default for the Cut Pattern