Versions Compared

Old Version 28

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 29

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridge Type Examples

  • The examples below display the different Cartridges that can be selected from the Cartridge Type Tabs.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.Take note that there is a separate configuration for cutting from the front (Normal Bevel - Front of Mat) and cutting from the back (Normal Bevel).

Image Added

45 Degree Cartridge

The 45 Degree Cartridge cuts a 45° bevel into the matboard.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angledeviates from the 90° right angle cut.

Image Modified
Image Added

45 Degree + Cartridge

The 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angledeviates from the 90° right angle cut.

Image Modified
Image Added

45 Degree Front Cartridge

The 45° Front Cartridge cuts a 45° bevel into the matboard from the front of the mat.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angledeviates from the 90° right angle cut.

Image Modified
Image Added

52 Degree Cartridge

The 52 Degree Cartridge cuts a 52° bevel into the matboard.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angledeviates from the 90° right angle cut.

Image Modified
Image Added

90 Degree Cartridge

The 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleBevel Type Definition

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angle.deviates from the 90° right angle cut.

Image Added

Deboss Cartridges

The Deboss Cartridges press into the matboard to create a subtle design.  

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleDeboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to TemplatesTemplate Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image AddedImage Modified

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Image Added

Pen Cartridge

The Pen Cartridge holds a pen to the matboard to draw onto the matboard. 

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titlePen Definition

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

In addition, you You can also Pen Designs, CutArts, LetterMats and TTFs.

Image ModifiedImage Added

See: Pen Cartridge Configurations

Image Added

Vinyl Cartridge

The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard. 

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleVinyl Definition

The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

Image ModifiedImage Added

See: Vinyl Cartridge Configurations

Image Added

Crease Cartridge

The Crease Cartridge perforates the material to make folding it easier when making Boxes. 

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Added
Expand
titleCrease Definition

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

Image AddedImage Modified

See: Add Crease Opening Function

See

Also

: Crease Cartridge Configurations

Image Added

Bevel Type Examples

Info

  • See Bevel Type Examples for examples of the different bevel types that the bladed cartridges can cut. 

Expand
titleBevel Type Definition

The Bevel Type

is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.The Standard, Normal or Forward Bevel is when the Angle of

refers to the angle at which the blade cuts the

Matboard/Fallout

surface

so it slants away from the surface

of

the Matboard/Fallout, and

the matboard

core is seen from the front.The Reverse Bevel is

when

the Angle of the blade cuts the Matboard/Fallout surface so it slants under the surface of the Matboard/Fallout, and the matboard core is not seen from the front.The 90° Straight Bevel is the lack of Angle that the blade cuts on the Matboard/Fallout surface, as it cuts at a 90° Right Angle, and the matboard core is not seen from the front.

it deviates from the 90° right angle cut.

Image Added
Image Modified