Versions Compared

Old Version 18

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 19

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Guides Toggle

Info

  • Use the Guides toggle to determine whether object edges and center points will snap to the Guide lines.

Info

  • Guides Toggle On allows object edges and center points to snap to the Guide lines. 

  • Guides Toggle Off allows object edges to be placed without snapping to the Guide lines.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

Applying the Guide to the Top Layer

  • Click the Positioning Toggle to Top.

  • Place the Guide by right-clicking on the opening and selecting the Guide direction and distance.

  • The Guide will be placed in relation to the Top layer of the opening.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

Applying the Guide to the Bottom Layer

  • Click the Positioning Toggle to Bottom.

  • Place the Guide by right-clicking on the opening and selecting the Guide direction and distance.

  • The Guide will be placed in relation to the Bottom layer of the opening.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

New Guide From Ruler

To Place a Guide From the Ruler

  • Click on a Ruler and drag onto the editor to place a Guide. 

To Move the Guide

  • Click on the Guide and drag it to the desired position.

Info

  • Optionally, click the Guide and click the Properties Tab to edit the position of the Guide.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

New Guide Relative to an Object

To Place a Guide a Relative Distance from an Opening

  • Select the opening.

  • Click the New Guide button.

  • Select the desired direction and placement to place a Guide onto the Editor.

    • New Vertical Guide

      • Left

      • Middle

      • Right

    • New Horizontal Guide

      • Top

      • Middle

      • Bottom

  • The Guide is placed in the specified position of the opening.

Info

Note: To place a Guide a specified distance to the Inside of an object, select New Guide From Other and select the desired direction and placement, using negative numbers.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

To Place Guide a Specified Distance from an Object:

  • Select the desired object.

  • Click the New Guide button.

  • Select New Guide From Other.

Expand
titleGuide Definition

A Guide is a

visual

Red line marker which

helps

can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

Image Added
Image Modified

  • Select the Direction checkbox for the Guide.

  • Enter the Distance from the opening to place the Guide.

  • Click OK.

Info

  • The Positioning Toggle determines whether the Guide is placed on the Top or Bottom layer of the opening.

  • Several Guides can be placed at the same time with this screen.

  • Negative Numbers can be entered to place a Guide within the opening.

Image Modified

  • The Guide is placed.

  • Openings can be moved and snapped to the Guide line.

Image Modified

Auto Alignment

Info
Expand
titleAuto Alignment Definition

The Auto Alignmentfunction

will display Blue

displays bluealignment lines as you move an object

is moved

and it lines up to another object in Designer,Trace and Nesting, making aligning openings easier.

This can be toggled on/off in the Options menu for Designer and Trace.

Image Added

See: Options Menu in Designer

See: Options Menu in Trace

Image Modified

Set the Default for Guides

Expand
titleDefault Settings for the Guides

Set the default for the Guides in the Admin > Editor section.

Image Modified

See Also: New Vertical Guide and New Horizontal Guide in the Right-Click Menu or New Guide on the Alignment Tab.