Versions Compared

Old Version 2

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 3

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Vertical Home for V-Grooves

The Vertical Home defines the global vertical placement of objects cut with the blade cartridges. 

V-Groove

cuts

Cuts too Far Up when Not Cutting the Outside: Bottom Border too Big

Adjust the Vertical Home if the V-Groove is cutting too far up when you are not cutting the outside of the mat. This is measured on the cutting side of the mat, from the bottom edge of the mat to the object.

The V-Groove is cutting too far up, making the bottom border too big.

Decrease the Vertical Home.

V-Groove

cuts

Cuts too Far Down when Not Cutting the Outside: Bottom Border too Small

Adjust the Vertical Home if the V-Groove is cutting too far down when you are not cutting the outside of the mat. This is measured on the cutting side of the mat, from the bottom edge of the mat to the object.

The V-Groove is cutting too far down, making the bottom border too small. 

Increase the Vertical Home.

Vertical Home Troubleshooting

Alternatively, adjust the Vertical Home Home on the Troubleshooting Screen. Make sure that you only have a V-Groove on the screen. 

Adjusting the Vertical Position for Non-Blade Cartridges

To adjust the vertical Vertical placement of the non-blade cartridges, (Deboss, Pen or Vinyl tools), see Vertical Adjustment.