Page Comparison

90 Degree Drops
The 90 Degree Cartridge cuts the drop with a 90° cut and leaves no bevel.

Select the 90 Degree Drop Bevel Type

Select the 90° Tab on the Configurations screen.

Select the specific Drop bevel type from the Current Bevel Type dropdown control.

Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.

Select the Area of Concern for Drops Below

Blade Depth is Incorrect When Using a SKU
Select this topic to adjust the Depth Bias.

Does Not Pause for Blade Change
Select this topic to adjust the Plunge Count.

Circle/Oval Rotation Button Utility
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

Exterior Backup is too Long
Select this topic to adjust the Exterior Backup.

Exterior Backup is too Short
Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long
Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short
Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long
Select this topic to adjust the Interior Backup.

Interior Backup is too Short
Select this topic to adjust the Interior Backup.

Interior Overcut is too Long
Select this topic to adjust the Interior Overcut.

Interior Overcut is too Short
Select this topic to adjust the Interior Overcut.

Drop Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.

Drop has a Swoop
Select this topic to adjust the Rotation.

Drop has a Flare
Select this topic to adjust the Rotation.

Oval Drop has a Bump
Select this topic to adjust the Oval Rotation.

Oval Drop has a Feather
Select this topic to adjust the Oval Rotation.

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.