Versions Compared

Old Version 54

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 55

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Rotation on Creases

Expand
titleRotation Definition

The Rotation controls for Swoops and Flares in Non-Oval objects.

Expand
titleSwoop Definition
A Swoopin a Non-Oval Opening is where the corners Curve Inward toward the opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening has a Swoop, Increase the Rotation.

Expand
titleFlare Definition
A Flare in aNon-OvalOpening is where the corners Curve Away from the opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening cuts with

Rotation on Creases

Info

  • If the Crease has a Swoop, Increase the Rotation.

  • If the Crease has a Flare, Decrease the Rotation.

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Added

Crease has a Swoop

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Crease has a Swoop.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleSwoop in Crease Definition

A Swoop in a Non-Oval Opening Crease is where the corners Curve Inward toward the openingcrease.

If the Crease has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Non-Oval Openings.If the Non-Oval Opening has a Swoop, Increase the Rotation.

Image AddedImage Added
Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified
Problem:

Crease has a Flare

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Crease has a Flare.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleFlare in Crease Definition

A Flare in a Non-OvalOpening Crease is where the corners Curve Away from the openingcrease.

If the Crease has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Non-Oval Openings.If the Non-Oval Opening cuts with a Flare, Decrease the Rotation.

Image AddedImage Added
Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified

See Also: Troubleshooting Utility for Openings

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Crease has a Swoop or Flares.

Resolution:

A Swoopin a Non-Oval Opening is where the corners Curve Inward toward the opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening has a Swoop, Increase the Rotation.

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleSwoop Definition
Expand
titleFlare Definition
A Flare in aNon-OvalOpening is where the corners Curve Away from the opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening cuts with a Flare, Decrease the Rotation

  • .

Image Modified