Versions Compared

Old Version 68

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 69

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Rotation on V-Grooves

Expand
titleOutside Rotation for V-Grooves Definition
The

Outside Rotation on

Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval

V-Grooves

. the Outside or Inside Cut

Expand
titleOutside Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either
Info

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with
Expand
titleOutside Flare Definition
A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with Image Removed

V-Groove Cutting Direction

Tip

  • The Inside of the V-Groove cuts First in a Clockwise direction.

  • These are Internal cuts, which cut into the V-Groove Fallout.

Tip

  • The Outside of the V-Groove cuts Second in a Counter-Clockwise direction.

    • These are External cuts, which cut into the Matboard.
    Expand
    titleHow to Select the Bevel Type to Edit

    Select desired Cartridge Tab. 

    Select the desired Bevel Type from Current Bevel Type.

    Edit the desired Configuration field.

    Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

    Image Removed
    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image AddedImage Added

    Cutting Direction of V-Grooves

    Tip

    • First Cut: Cuts the Interior cut into the Fallout Clockwise.

    • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

    		Image Added
    Problem:

    V-Groove Outside has a Swoop

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • If the Outside cut of Non-Oval the V-Groove has Swoops.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOutside V-Groove Cut Swoop Definition

    A Swoop in a Non-Oval the Outside cut of the V-Groove is where the corners Curve Inward toward the opening on either V-Groove.

    If the Outside or Inside Cut cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor  and Flareson Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

    Image AddedImage Added
    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image RemovedImage AddedImage Added

    V-Groove Outside has a Flare

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • If the Outside cut of Non-Oval the V-Groove has Flares.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOutside V-Groove Cut Flare Definition

    A Flare in a Non-Oval on the Outside cut of the V-Groove is where the corners Curve Away from the opening on either V-Groove.

    If the Outside or Inside Cut cut of the V-Groove has a Flare, Increase the Outside Rotation.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor  and Flareson Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

    Image AddedImage Added
    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image RemovedImage AddedImage Added

    See Also: Troubleshooting Utility for

    Non-Oval

    V-Grooves

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Outside Non-Oval If the Outside cut of the V-Groove has a Swoop or Flare.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

    If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

    Expand
    titleOutside Rotation for V-Grooves Definition

    The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

    Expand
    titleOutside Swoop Definition
    Expand
    titleOutside Flare Definition

    A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

    		Image Modified