Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Opening Cuts too Far Right (Not Cutting the Outside)

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleHorizontal Home on Openings Definition

The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home /wiki/spaces/FrameShop8x/pages/1942511548.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home /wiki/spaces/FrameShop8x/pages/1942511548.

See: Horizontal Home for Openings Configurations
Expand
titleHow to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far Left (Not Cutting the Outside)

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleHorizontal Home on Openings Definition

The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home /wiki/spaces/FrameShop8x/pages/1942511548.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home /wiki/spaces/FrameShop8x/pages/1942511548.

See: Horizontal Home for Openings Configurations
Expand
titleHow to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Info
Info

...