Vertical Home for V-Grooves
| Expand | ||
|---|---|---|
| ||
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges. If the Object is cut too far Up, Decrease the Vertical Home. If the Object is cut too far Down, Increase the Vertical Home. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
V-Groove Cuts too Far Up (Not Cutting the Outside) | Problem:|||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Resolution:
| |||||||||||||||||||||||||||||
V-Groove Cuts too Far Down (Not Cutting the Outside) | Problem:|||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Resolution:
| |||||||||||||||||||||||||||||
|