Horizontal Home for Openings Definition |
|---|
| Expand |
|---|
| title | Horizontal Home Definition |
|---|
|
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.
If the is cut too far Left, Increase the Horizontal Home.If the Opening is cut too far Right, Decrease the Horizontal Home.
Image Removed| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Opening Cuts too Far Right (Not Cutting the Outside) |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Horizontal Home on Openings Definition |
|---|
| The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges. If the Opening is cut too far Too Far Left Horizontally, Increase the Horizontal Home. If the Opening is cut too far Too Far Right Horizontally, Decrease the Horizontal Home. Image AddedImage AddedSee: Horizontal Home for Openings Configurations |
| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| Image AddedImage Modified |
Opening Cuts too Far Left (Not Cutting the Outside) |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Horizontal Home on Openings Definition |
|---|
| The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges. If the Opening is cut too far Too Far Left Horizontally, Increase the Horizontal Home. If the Opening is cut too far Too Far Right Horizontally, Decrease the Horizontal Home. Image AddedImage AddedSee: Horizontal Home for Openings Configurations |
| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| Image ModifiedImage Added |
...