changes.mady.by.user dani.simmonds
Saved on Jul 21, 2023
Saved on Feb 07, 2024
A Swoop in
the inside or outside cut of the V-Groove is where the corners Curve Inward toward the opening
.
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.
A Swoop in a V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.
If the Outside
cut of the V-Groove
has a Swoop, Decrease the Outside Rotation.
If the Inside
has a Swoop, Increase the Inside Rotation.
The Rotation on V-Grooves controls for Swoopsor Flares on V-Grooves.
See: Rotation on V-Grooves Configurations
the outside cut of the V-Groove is where the corners Curve Inward toward the opening on
the Outside Cut
of the V-Groove.
The Outside Rotation
for V-Grooves
controls for Swoopsor Flareson
V-Grooves.
See: Outside Rotation for V-Grooves Configurations
A Swoop on the inside cut of the V-Groove is where the corners Curve Inward toward the opening on the inside cut of the V-Groove.
The Inside Rotation for V-Grooves controls for Swoopsor Flareson V-Grooves.
For Swoop on a Non-Oval Opening, see Swoop on a Non-Oval Opening Definition.
Image AddedImage Added
See: Inside Rotation for V-Grooves Configurations
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
