Versions Compared

Old Version 40

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 41

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Bevel Type Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle

deviates from the 90° right angle cut.

Expand
titleBevel Type Full Definition

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle. Info

  • The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

    • The Standard, Normal or Forward Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it slants away from the surface of the Matboard/Fallout, and the matboard core is seen

    deviates from the 90° right angle cut.

    Image Added

    Examples:

    Info

    Normal Bevel

    • The Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front.

    Expand
    titleNormal Bevel Definition

    The Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front.

    The

    Reverse

    Bevel

    is when the Angle of

    Type refers to the angle at which the blade cuts the

    Matboard/Fallout surface so it slants under the surface of the Matboard/Fallout, and the matboard core is not seen from the front.

  • The 90° Straight Bevel is the lack of Angle that the blade cuts on the Matboard/Fallout surface, as it cuts at a 90° Right Angle, and the matboard core is not seen from the front.

    • Image Removed
    Info

    • The Reverse Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it slants Under the surface of the Matboard/Fallout, and the Matboard Core is Not Seen from the front.

    Image Removed
    Info

    • The Normal Drop is when the Angle of the blade cuts on the Fallout surface so it slants away from the surface of the Fallout, and the matboard core is seen from the front.

    Image Removed
    Info

    • The Reverse Drop is when the Angle of the blade cuts the Fallout surface so it slants under the surface of the Fallout, and the matboard core is not seen from the front.

    Image Removed
    Info

    • The 90° Straight Bevel is the lack of Angle that the blade cuts on the Matboard/Fallout surface, as it cuts at a 90° Right Angle, and the matboard core is not seen from the front.

    Image Removed
    Info

    • The Outside Bevel is when the Angle of the blade cuts the Fallout surface so it slants under the surface of the Fallout, and the matboard core is not seen from the front.

    Image Removed
    Info

    • A Normal Bevel Closed V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other. They are cut halfway through the matboard, revealing the matboard core.

    Image Removed
    Info

    • A Normal Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.

    Image Removed
    Info

    • A Reverse Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.

    Image Removed

    surface of the matboard when it deviates from the 90° right angle cut.

    Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Opening Configurations

    See: 45 Degree Plus Opening Configurations

    See: 45 Degree Front Opening Configurations

    See: 52 Degree Opening Configurations

    See: 90 Degree Opening Configurations

    		Image Added
    Info

    Reverse Bevel

    • The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.

    Expand
    titleReverse Bevel Definition

    The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Opening Configurations

    See: 45 Degree Plus Opening Configurations

    See: 45 Degree Front Opening Configurations

    See: 52 Degree Opening Configurations

    		Image Added
    Info

    Normal Drop

    • The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front.

    Expand
    titleNormal Bevel Drop Definition

    The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front.

    The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Drop Configurations

    See: 45 Degree Plus Drop Configurations

    See: 45 Degree Front Drop Configurations

    See: 52 Degree Drop Configurations

    See: 90 Degree Drop Configurations

    		Image Added
    Info

    Reverse Drop

    • The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    Expand
    titleReverse Bevel Drop Definition

    The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Drop Configurations

    See: 45 Degree Plus Drop Configurations

    See: 45 Degree Front Drop Configurations

    See: 52 Degree Drop Configurations

    		Image Added
    Info

    90° Straight Cut “Bevel”

    • A 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front.

    Expand
    title90° Straight Cut Bevel Definition

    A 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front.

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 90 Degree Bevel Opening Configurations

    See: 90 Degree Bevel Drop Configurations

    See: 90 Degree Bevel Outside Configurations

    		Image Added
    Info

    Outside Bevel

    • The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    Expand
    titleOutside Bevel Definition

    The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Outside Configurations

    See: 45 Degree Plus Outside Configurations

    See: 45 Degree Front Outside Configurations

    See: 52 Degree Outside Configurations

    See: 90 Degree Outside Configurations

    		Image Added
    Info

    Closed V-Groove

    • A Normal BevelClosed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

    Expand
    titleClosed V-Groove Definition

    The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

    First Cut: Cuts the Interior cut into the Fallout Clockwise.

    Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

    Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

    Image AddedImage Added

    See: 45 Degree Closed V-Groove

    See: 45 Degree Plus Closed V-Groove

    See: 45 Front Closed V-Groove

    See: 52 Degree Closed V-Groove

    		Image Added
    Info

    Normal Bevel Open V-Groove

    • A Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front.

    Expand
    titleNormal Bevel Open V-Groove Definition

    The Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front.

    First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*.

    Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

    *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

    Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

    Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

    Image AddedImage AddedImage Added

    See: 45 Degree Normal Bevel Drop Configurations

    See: 45 Degree Normal Bevel Opening Configurations

    See: 45 Degree Plus Normal Bevel Drop Configurations

    See: 45 Degree Plus Normal Bevel Opening Configurations

    See: 45 Degree Front Normal Bevel Drop Configurations

    See: 45 Degree Front Normal Bevel Opening Configurations

    		Image Added
    Info

    Reverse Bevel Open V-Groove

    • A Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front.

    Expand
    titleReverse Bevel Open V-Groove

    The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard color is visible from the front.

    First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*.

    Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

    *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

    Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

    Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

    Image AddedImage AddedImage Added

    See: 45 Degree Reverse Bevel Drop Configurations

    See: 45 Degree Reverse Bevel Opening Configurations

    See: 45 Degree Plus Reverse Bevel Drop Configurations

    See: 45 Degree Plus Reverse Bevel Opening Configurations

    See: 45 Degree Front Reverse Bevel Drop Configurations

    See: 45 Degree Front Reverse Bevel Opening Configurations

    See: 52 Degree Reverse Bevel Drop Configurations

    See: 52 Degree Reverse Bevel Opening Configurations

    		Image Added
    Info

    90° Open V-Groove

    • The 90° Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front.

    Expand
    title90° Bevel Open V-Groove Definition

    The 90° Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front.

    First Cut: Cuts the Interior cut into the Fallout Clockwise: 90 Degree Bevel Drop*.

    Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: 90 Degree Bevel Opening.

    *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

    Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

    Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

    Image AddedImage AddedImage Added

    See: 90 Degree Normal Bevel Drop Configurations

    See: 90 Degree Normal Bevel Opening Configurations

    		Image Added
    Info