Page Comparison

The 45° Front Cartridge cuts the front of the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Front Normal Bevel Opening Definition

See: 45 Degree Front Reverse Bevel Opening Definition

See: 45 Degree Front Normal Bevel Drop Definition

See: 45 Degree Front Reverse Bevel Drop Definition

See: 45 Degree Front Outside Definition

See: 45 Degree Front Normal Bevel Closed V-Groove Definition

See: 45 Degree Front Normal Bevel Open V-Groove Definition

See: 45 Degree Front Reverse Bevel Open V-Groove Definition

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.