...
Cutting an Extra Dense Layer with the 90 Degree Cartridge | |
|---|---|
Select the desired layer on the Cutting Preview. Click the Cut Speeds button to open the Cut Speeds. |  |
Click the checkbox for Extra Dense Material. Dense Material will automatically be selected. Adjust the slidebar underneath the checkbox to the desired percentage of cutting speed. For instance, 50% is 50% of the standard cutting speed. Click OK. |  |
Click on the Blade Depth button to open the Blade Depth screen. Change the Blade Depth to the appropriate setting for this matboard. Click OK. |  |
The Cutting Preview displays the Dense layer with a pound sign and indicates that this layer is Extra Dense. |  |
Click Cut to cut the mat and Align the Head if requested. The Head plunges at the home position and applies the current pressure. It then displays a prompt to adjust the head pressure to the high setting. |  |
Pull out the air regulator pressure knob by pulling it to the left. |   |
Turn the air regulator pressure knob clockwise until the marker on the gauge is at the high setting, as indicated by the bracket to the right of the air pressure gauge. |  |
Make sure the gauge does not go above 60 psi. |  |
Push the air regulator pressure knob back in by pushing it to the right. Click OK to cut the mat with this setting. |  |