Versions Compared

Old Version 14

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 15

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Curve Design Details

  • Click on a Curve to see the specific details about it.

InfoNote: If

Expand
titleIf the Arc Displays as Curve/Spline

If you bring in the design from Designer, Offset the Arc and select the offset, or Convert Arcs to Splines, then clicking on the "Arc" will display Curve/Spline information. 

Expand
titleOffset Definition

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Reveal field in Trace.

Expand
titleArcs Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand
titleCurve Tool Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Modified
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • The Curve Design Details section displays information about the selected Curve.

Expand
titleCurve Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed
Image Added

Design Curve Details

Start X and Y 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Displays the Start X/Y Coordinates of the Curve’s start point when drawn.

    • If you clicked on the upper left and drew by dragging to the lower right, that would make the start point in the upper left corner. 

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleCurve Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed
Image Added

Mid X1 and Y1 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Displays the first Mid Point X1 and Y1 Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Removed
Image Added

Mid X2 and Y2 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Displays the second Mid Point X2 and Y2 Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Removed
Image Added

End X and Y 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Displays the End Points X and Y Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Removed
Image Added

Bevel Type 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF
Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed
Image Added

Layer 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Displays the Layer this object is assigned to if the object is Traced.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed
Image Added