Versions Compared

Old Version 52

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 53

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Interior Backup on V-Grooves

Expand
titleV-Groove Interior Backup Definition

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup.

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleWhen Cutting from the Front

Select Current Bevel Type-Front of Mat when cutting from the front of the mat.

*The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut.

Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Cut Direction and Cut Order

Inside Cut of the V-Groove

Infotip

  • The Inside of the V-Groove cuts First in a clockwise Clockwise direction.

  • These are Internal are Internal cuts, which cut into the V-Groove fallout.

    • V-Groove Interior Backup

    • V-Groove Interior Overcut

Outside Cut of

  • the V-

Groove

  • Groove Fallout.

Infotip

  • The Outside of the V-Groove cuts Second in Second in a counterCounter-clockwise Clockwise direction.

  • These are are Externalcuts cuts, which cut into the matboard.

  • V-Groove Exterior Backup

    • V-Groove Exterior Overcut

    Matboard.

V-Groove Interior Backup too Long

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Interior Backup of the V-Groove cuts Too Long.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleV-Groove Interior Backup Definition

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup.

Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Interior Backup too Short

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Interior Backup of the V-Groove cuts Too Short.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleV-Groove Interior Backup Definition

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup.

Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.