Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
| 
Image RemovedEditing the Oval Rotation on Openings |
|---|
| Expand |
|---|
| A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. |
| Expand |
|---|
| A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Bump, Increase theOval Rotation. |
Selecting the Oval Rotation in the Configurations | Expand |
|---|
| title | When Cutting from the Front |
|---|
| Select Current Bevel Type-Front of Mat when cutting from the front of the mat. *The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut. |
| Expand |
|---|
| title | How to Adjust the Oval Rotation |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Oval Opening has a Feather |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. |
| Expand |
|---|
| title | How to Adjust the Oval Rotation |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Oval Opening has a Bump |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Bump, Increase theOval Rotation. |
| Expand |
|---|
| title | How to Adjust the Oval Rotation |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
See Also: Troubleshooting Utility for Ovals |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. |
| Expand |
|---|
| A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Bump, Increase theOval Rotation. |
| |
See Also: Circle/Oval Rotation Utility |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Feather, Decrease the Oval Rotation. |
| Expand |
|---|
| A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. The Oval Rotation controls for Bumps or Feathers on an Oval Opening. If the Oval Opening cuts with a Bump, Increase theOval Rotation. |
| |