Versions Compared

Old Version 63

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 64

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Rotation on V-Grooves

Expand
titleOutside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand
titleOutside Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleOutside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed

Selecting the V-Groove Rotation in the Configurations

  • Select the desired Cartridge Tab. 

  • Select the V-Groove from the Current Bevel Type.

    • Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

    Image Added
    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    ...

    V-Groove Outside has a Swoop

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Outside cut of the Non-Oval V-Groove has Swoops.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOutside V-Groove Cut Swoop Definition

    A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

    If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    V-Groove Outside has a Flare

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Outside cut of the Non-Oval V-Groove has Flares.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOutside V-Groove Cut Flare Definition

    A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

    If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

    Expand
    titleHow to Adjust the Outside Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    See Also: Troubleshooting Utility for Non-Oval V-Grooves

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Outside Non-Oval V-Groove has a Swoop or Flare.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOutside Rotation for V-Grooves Definition

    The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

    Expand
    titleOutside Swoop Definition

    A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

    If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

    Expand
    titleOutside Flare Definition

    A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

    The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

    If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.