Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Editing the Rotation on V-Grooves

Expand

title	Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand

title	Outside Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand

title	Outside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Selecting the V-Groove Rotation in the Configurations

Select the desired Cartridge Tab.
Select the V-Groove from the Current Bevel Type.
Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

Adjusting the V-Groove

Expandtip

title

How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus

/Minus

(Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Cutting Direction

Tip

First Cut of V-Groove:

Cuts the Interior V-Groove Line.
Cuts into Fallout, not the matboard.
Cuts Clockwise.
This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

Cuts the Exterior V-Groove Line.
Cuts into Matboard, not the fallout.
Cuts Counter-Clockwise.
This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside cut of the Non-Oval V-Groove has Swoops.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Non-Oval V-Groove has a Swoop:
- Decrease the Outside Rotation.

Expand

title	Outside V-Groove Cut Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

V-Groove Outside has a Flare

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Non-Oval V-Groove has a Flare:
- Increase the Outside Rotation.

Expand

title	Outside V-Groove Cut Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Non-Oval V-Groove has a Swoop or Flare.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Troubleshooting Configurations to fine-tune for Swoop/Flare in a Non-Oval V-Groove.

Expand

title	Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand

title	Outside Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand

title	Outside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Versions Compared

Old Version 59

New Version 60

Key

Cartridges Involved

Editing the Rotation on V-Grooves

V-Groove Cutting Direction

V-Groove Outside has a Swoop

Problem:

Resolution:

V-Groove Outside has a Flare

Problem:

Resolution:

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Resolution: