Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Editing the Oval Rotation on Openings

Expand

title	Oval Rotation Definition

The Oval Rotation controls for Feathersor Bumpson an Oval Opening.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Selecting the Oval Rotation in the Configurations

Select desired Cartridge Tab.
Select the Opening Bevel Type from Current Bevel Type.
Edit the Oval Rotation field.

Select the desired Cartridge Type Tab.

Select the desired bevel type from the Current Bevel Type dropdown control.

Select Current Bevel Type

Expand

title	Selecting the Oval Rotation Configuration to Edit

When Cutting from the Front

Select Current Bevel Type-Front of Mat if it is being cut when cutting from the front of the mat.Edit the Oval Rotation field

*The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut.

Tip

Adjusting the Oval Rotation

When adjusting Configurations, click the Plus/Minus on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.

Oval Opening has a Feather

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Feather.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Feather:
- Decrease the Oval Rotation.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Oval Opening has a Bump

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Bump:
- Increase theOval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Feather/Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in an Oval Opening.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval has a Feather/Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals for Feathers and Bumps.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Versions Compared

Old Version 57

New Version 58

Key

Cartridges Involved

Editing the Oval Rotation on Openings

Oval Opening has a Feather

Problem:

Resolution:

Oval Opening has a Bump

Problem:

Resolution:

See Also: Troubleshooting Utility for Ovals

Problem:

Resolution:

See Also: Circle/Oval Rotation Utility

Problem:

Resolution: