Versions Compared

Old Version 22

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 23

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

52 Degree Cartridge Configurations

Info

  • The 52 Degree Cartridge cuts a 52° bevel into the matboard. 

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 52 Degree Cartridge Bevel Type

  • Select the 52° Cartridge tab.

  • Select the desired Bevel Type from the Current Bevel Type dropdown control.

  • Select the cut type from the list below.

Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

52 Degree Opening Configurations

The 52 Degree Opening includes the following bevel types:

Tip

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Image Modified

52 Degree Drop Configurations

The 52 Degree Drop includes the following bevel types:

Tip

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Image Modified

52 Degree Outside Configurations

The 52 Degree Outside includes the following bevel types:

Tip

  • Outside

  • Outside-Front of Mat

Image Modified

52 Degree V-Groove Configurations

The 52 Degree V-Groove includes the following bevel types:

Tip

  • V-Groove

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Expand
titleTroubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.