Versions Compared

Version Old Version 45 New Version 46
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Horizontal Home for Openings Definition

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.

Adjusting the Horizontal Home

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big

Problem:

  • The opening is cut too far to the Right Horizontally.

Resolution:

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.

Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small

Problem:

  • The opening cut cut too far to the Left Horizontally.

Resolution:

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.

Info
Info

...