Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image Modified

Oval Rotation Definition

Expand

title	Oval Rotation Definition

The Oval Rotation controls for Feathersor Bumpson an Oval Opening.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Adjusting the Oval Rotation

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image Modified

Current Bevel Type
Select the desired Cartridge Type Tab. Select the desired bevel type from the Current Bevel Type dropdown control. Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.	Image Modified

Oval Opening has a Feather

Problem:

The Oval Opening cuts with a Feather.

Resolution:

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Image Modified

Oval Opening has a Bump

Problem:

The Oval Opening cuts with a Bump.

Resolution:

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Image Modified

Problem:

The Oval Opening cuts with a Feather/Bump.

Resolution:

Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in an Oval Opening.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Problem:

The Oval cuts with a Feather/Bump.

Resolution:

Use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals for Feathers and Bumps.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Image Modified

Versions Compared

Old Version 50

New Version 51

Key

Cartridges Involved

Oval Rotation Definition

Current Bevel Type

Oval Opening has a Feather

Problem:

Resolution:

Oval Opening has a Bump

Problem:

Resolution:

See Also: Troubleshooting Utility for Ovals

Problem:

Resolution:

See Also: Circle/Oval Rotation Utility

Problem:

Resolution: