Cartridges Involved | |||
---|---|---|---|
This Configuration element involves the following Cartridges.
|
Tool Configs Section | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
HorizontalProblem:
Resolution:If too far left, increaseResolution:
| |||||||||||
VerticalProblem:
Resolution:If too far down, increaseResolution:
| |||||||||||
Depth BiasProblem:
Resolution:Cut too shallow, increaseResolution:
| |||||||||||
Plunge CountProblem:
Resolution:If cuts too long before pausing, decrease the Plunge Count. If cuts too short before pausing, increase the Plunge Count. Resolution:
| |||||||||||
Circle/Oval Rotation ButtonProblem:
Expand | | ||||||||||
| |||||||||||
| |||||||||||
The oval cuts with a Bump of material left into the opening. |
Expand | ||
---|---|---|
| ||
A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. |
Expand | ||
---|---|---|
| ||
A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. |