Versions Compared

Version Old Version 42 New Version 43
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Horizontal Home for Openings Definition

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global horizontal Horizontal placement of objects cut with the blade cartridges Blade Cartridges.

Adjusting the Horizontal Home

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big

Problem:

  • The opening is cut too far to the right Horizontally. Right Horizontally.

Resolution:

Expand
titleHorizontal Home Definition

The The Horizontal Home controls where the opening is cut Horizontally.

Resolution:

 defines the global Horizontal placement of objects cut with the Blade Cartridges.

Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small

Problem:

  • The opening cut cut too far to the left horizontallythe Left Horizontally.

Resolution:

Expand
titleHorizontal Home Definition

The The Horizontal Home controls where the opening is cut Horizontally.

Resolution:

Image Removed

See Also: Horizontal Home Troubleshooting

InfoAlternatively, adjust the Horizontal Home 

 defines the global Horizontal placement of objects cut with the Blade Cartridges.

Image Added
InfoTo adjust the 
Info
Image Removed
Info

  • See Also:

Adjusting the Horizontal Position for Non-Blade Cartridges
Image Removed