Versions Compared

Version Old Version 23 New Version 24
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

...

Crease Exterior Backup is too Long

Problem:

  • The Crease Exterior Backup is too Long.

Resolution:

Expand
titleExterior Backup Definition

The Exterior Backup controls where the blade plungesBlade Plunges into the matboard Matboard (not the Fallout) on the exterior Exterior cut. 

Resolution:		Image AddedDecrease the

Crease Exterior Backup

.

  • See Exterior Backup for additional information.

    • Image Removed

    is too Short

    Problem:

    • The Crease Exterior Backup is too Short.

    Problem

    Resolution:

    Expand
    titleExterior Backup Definition

    The Exterior Backup controls where the blade plungesBlade Plunges into the matboard Matboard (not the Fallout) on the exterior Exterior cut. 

    Resolution:

    • Increase the Exterior Backup.

    • See Exterior Backup for additional information.

    Crease Exterior Overcut is too Long

    Problem:

    • The Crease Exterior Overcut is applied Too Long.

    Resolution:

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts Blade Retracts from the matboard Matboard (not the Fallout) on the exterior cuts.

    Resolution:

  • Decrease the Exterior Overcut.

    • See Exterior Overcutfor additional information

    Exterior cut.

    Crease Exterior Overcut is too Short

    Problem:

    • The Crease Exterior Overcut is appliedToo Short.

    Resolution:

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on the exterior cuts.

    Resolution:

    • Increase the Exterior Overcut.

    • See Exterior Overcut for additional information.

    Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

    Crease is the Wrong Size

    Problem:

    • Crease is applied at the Wrong Size.

    Expand
    titleOpening Adjustment Definition

    The Opening Adjustment controls the size of the opening.

    Resolution:

    Expand
    titleOpening Adjustment Definition

    The Opening Adjustment controls the size of the object cut or applied with non-blade cartridges.

    Crease is Applied at the Wrong Depth When Using a SKU

    Problem:

    • The Crease is applied at the Wrong Depth When Using a SKU.

    Expand
    titleDepth Bias Definition

    The Depth Bias calculates the proper Blade Depth when a SKU is selected for the matboard.

    Resolution:

    Cut too shallow, increase

    Resolution:

    • The Blade Depth is too Deep, Decrease the Depth Bias.Cut too

    • deep, decrease The Blade Depth is too Shallow, Increase the Depth Bias.

    • See Depth Bias for additional information.

    Expand
    titleDepth Bias Definition

    The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.

    Troubleshooting Button 

    Info

    • Select this topic to see information on editing with the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

    ...