Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

52 Degree Cartridge Configurations
The 52 Degree Cartridge cuts a 52° bevel into the matboard.

Select the 52 Degree Cartridge Bevel Type
Select the 52° Cartridge tab. Select the desired Bevel Type from the Current Bevel Type dropdown control. Select the cut type from the list below.

The 52 Degree Opening includes the following bevel types:

Tip
Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat

The 52 Degree Drop includes the following bevel types:

Tip
Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat

The 52 Degree Outside includes the following bevel types:

Tip
Outside Outside-Front of Mat

The 52 Degree V-Groove includes the following bevel types:

Tip
V-Groove

Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.