Versions Compared

Old Version 47

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 48

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Oval Rotation Definition

Expand
titleOval Rotation Definition

The Oval Rotation controls for Feathersor Bumpson an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Expand
titleFeather Definition

A Featherin an Oval Opening is a Fringe of material left behind where the cut started and ended.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand
titleBump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Adjusting the Oval Rotation

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

...

Oval Opening has a Feather

Problem:

  • The Oval Openings is cut with a feather Opening cuts with a Feather.

Resolution:

  • If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Oval Opening has a Bump

Problem:

  • The Oval Openings is cut Opening cuts with a bump Bump.

Resolution:

See Also: Troubleshooting Utility for Ovals

Problem:

  • The Circle/Oval Opening cuts with a Feather/Bump.

Resolution:

See Also: Circle/Oval Rotation Utility

Problem:

  • The Circle/Oval cuts with a Feather/Bump.

Resolution: