Page Comparison

...

52 Degree Cartridge Configurations
The 52 Degree Cartridge cuts a 52° bevel into the matboard.	Image Modified

Select the 52 Degree Cartridge Bevel Type
Select the 52° Cartridge tab. Select the desired Bevel Type from the Current Bevel Type dropdown control. Select the cut type from the list below.

52 Degree Opening Configurations

The 52 Degree Opening includes the following bevel types:

Tip
Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat

Image Modified

The 52 Degree Drop includes the following bevel types:

Tip
Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat

Image Modified

The 52 Degree Outside includes the following bevel types:

Tip
Outside Outside-Front of Mat

Image Modified

The 52 Degree V-Groove includes the following bevel types:

Tip
V-Groove

Image Modified

Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.