Versions Compared

Version Old Version 38 New Version 39
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Horizontal Home for Openings Definition

Infoexpand
titleHorizontal Home Definition

The Horizontal Home defines the global horizontal placement of objects cut with the blade cartridges

when not cutting the outside of the mat. 

  • This is measured from the inside of the bevel to the edge of the mat.

    • This is viewed as it cut on the machine, i.e., from the back if cutting from the back, or from the front if cutting from the front

    .

    Tip

    • To adjust, click plus/minus on the desired field about five times.

    • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved.

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved

    • .

    Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big

    Problem:

    • The opening is cut too far to the right Horizontally.

    Expand
    titleHorizontal Home Definition

    The Horizontal Home controls where the opening is cut Horizontally.

    Resolution:

    Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

    • Continue making adjustments until the desired outcome is achieved

    • .

    Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small

    Problem:

    • The opening cut cut too far to the left horizontally.

    Expand
    titleHorizontal Home Definition

    The Horizontal Home controls where the opening is cut Horizontally.

    Resolution:

    Info

    See Also: Horizontal Home Troubleshooting

    Info

    ...