Versions Compared

Version Old Version 16 New Version 17
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

The Other Cartridge Adjustments Involve These Cartridges

Other Cartridge Adjustments

Info

  • The Other Cartridge Adjustments section contains additional configuration fields for V-Grooves and for the non-blade Tool cartridges as described below.

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Problem:

  • The V-Groove width is cut too wide/ or too thin.

Expand
titleV-Groove Width Adjustment Definition

The V-Groove Width Adjustment controls the width of the V-Groove.

Resolution:

Adjust the 

  • The V-Groove is cutting too thin, increase the Width Adjustment.

  • The V-Groove is cutting too wide, decrease the Width Adjustment.

  • See V-Groove Width Adjustment for more information.

Outside Rotation (V-Groove) 

Problem:

Expand
title

Resolution:

Adjust the Outside Rotation
Outside Rotation on Non-Oval V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the outside cut of the Non-Oval V-Grooves.

Resolution:

  • The Outside cut of the non-oval V-Groove has Swoops, decrease the Outside Rotation.

  • The Outside cut of the non-oval V-Groove has Flares, increase the Outside Rotation value.

  • See Outside Rotation for additional information.

Inside Rotation (V-Groove) 

Problem:

Expand
titleInside Rotation on Non-Oval V-Grooves Definition

The Inside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the inside cut of the Non-Oval V-Grooves.

Resolution:

  • The Inside cut of the non-oval V-Groove has Swoops, increase the Inside Rotation. 

  • The Inside cut of the non-oval V-Groove has Flares, decrease the Inside Rotation. 

  • Adjust the Inside Rotation on a Non-Oval V-Groove.

Outside Oval Rotation (V-Groove)  

Problem:

Expand
titleOutside Oval Rotation for V-Grooves Definition

The Outside Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

Resolution:

  • The Outside Cut of an Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

  • The Outside Cut of an Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

  • Adjust the Outside Oval Rotation on the Outside cut of an Oval V-Groove.

Inside Oval Rotation (V-Groove)  

Problem:

Expand
titleInside Oval Rotation for V-Grooves Definition

The Inside Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

Resolution:

  • The Inside cut of an Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

  • The Inside Cut of an Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

  • Adjust the Inside Oval Rotation on the Inside cut of an Oval V-Groove.

Horizontal Adjustment (Tool Specific) 

Problem:

  • The Deboss, Pen or Vinyl Tool Objectis applied in the wrong place Horizontally.

Resolution:

Vertical Adjustment (Tool Specific) 

Problem:

  • The Deboss, Pen or Vinyl Tool Objectis applied in the wrong place Vertically.

Problem:

Depth Setting (Tool Specific) 

Problem:

Resolution:

Corner Pause (ms) (Tool Specific)  

Problem:

Resolution:

Overshoot (Tool Specific) 

Problem:

Resolution:

Plunge (Tool Specific) 

Problem:

Resolution:

Install Pen  

Problem:

  • How to calibrate the Pen Tool.

Resolution:

  • The Install Pen utility is used to calibrate the system for different Pens.