Versions Compared

Old Version 37

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 38

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Rotation on V-Grooves Definition

Info

The Outside Rotation controls for Swoopsor Flareson the outside cut on non-oval V-Grooves.

Tip

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into fallout, not the matboard.

  • Cuts clockwise.

  • This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into matboard, not the fallout.

  • Cuts counter-clockwise.

  • This uses the Outside Rotation.

Image Added

V-Groove Outside has a Swoop

Problem:

  • The Outside cut of the non-oval V-Groove has Swoops.

Image Removed

Resolution:

  • Decrease the Outside Rotation.

Image Added
Info

  • When making adjustments, click the plus or minus button at the end of the desired field about four times.

  • In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time.

  • Click OK and do another test cut.

  • Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image ModifiedImage Removed

V-Groove Outside has a Flare

Problem:

  • The Outside cut of the non-oval V-Groove has Flare.

Image Removed

Resolution:

  • Increase the Outside Rotation value. 

Image Added
Info

  • When making adjustments, click the plus or minus button at the end of the desired field about four times.

  • In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time.

  • Click OK and do another test cut.

  • Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image RemovedImage Modified

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

  • The Non-Oval V-Groove cuts with a Swoop/Flare.

Resolution: